Category Archives: Tube tester repair

A Quick Overview of Tube Testing…

Now I mention a number of times now of letting the equipment be the final arbitter of the tube’s merit. This is simply because some circuits are not super critical to the tube’s “measured” value, and there is no question there are some pieces of equipment that are very critical of having even acceptable tubes from the tester not being good enough for the circuit (I have a Dumont scope like the one in the “Raj Mahal” which is that way.). Conversely I have a tube radio chassis that has all 5 of it’s tubes test below the question mark, and yet reception is very strong, sound quality is as good as a typical table radio and everything works as it should. Continue reading

Posted in Amplifier repairs, Auditorium equipment, Cathode Ray Tube, CRT, Homebrew, Project, recievers and tuners and guitar amps, Repair, Stereo amps, Tube tester repair, Uncategorized, updating tube tester | Tagged , , , , , , , , , ,

Triplett 3212 “Tube Analyser”, Tube Tester

Other updates are the replacement of the copper oxide rectifier with a silicon rectifier (1N4007), and replacement of the old paper cap with a polyester capacitor of the same 0.1 microfarad capacitance at 630 WVDC. The copper oxide rectifier is safer than selenium, but still has significant reverse bias leakage, the silicon diode has much less leakage, so a significant upgrade to performance. Continue reading

Posted in Project, references, Stereo amps, Tester repair, Tube tester repair, updating tube tester | Tagged , , , , ,